Primitive Technology: Volute Shaped Blower
Subscribe: http://bit.ly/subPT | Never miss a video! Enable ‘ALL’ Notifications!
Watch my newest content: https://youtube.com/playlist?list=PLGnWLXjIDnpBR4xqf3FO-xFFwE-ucq4Fj&playnext=1&index=2
Follow Primitive Technology:
Wordpress: https://primitivetechnology.wordpress.com/
Patreon: https://patreon.com/user?u=2945881
Watch More Primitive Technology:
Newest Uploads: https://youtube.com/playlist?list=PLGnWLXjIDnpBR4xqf3FO-xFFwE-ucq4Fj&playnext=1&index=2
Pyrotechnology: https://youtube.com/playlist?list=PLGnWLXjIDnpBVRqu5lz5JGaQxjPs7q3CJ&playnext=1&index=2
Shelter: https://youtube.com/playlist?list=PLGnWLXjIDnpBBsdKZb-vy30o88SIxItp2&playnext=1&index=2
Weapons: https://youtube.com/playlist?list=PLGnWLXjIDnpA-XGDrrmVgBnSXx15i2Awp&playnext=1&index=2
Popular Videos: https://youtube.com/playlist?list=PLGnWLXjIDnpAb29Lrdki5BPjTpMon8zla&playnext=1&index=2
About This Video:
I made a volute shaped blower where the housing for the fan is volute shaped, that is to say a widening spiral to test the effectiveness of a one way spinning impeller. The previous blower design is tear drop shaped so that the direction that the fan spins is un important. Also with the previous design the impeller spins one way and then the other as it is powered by a simple string mechanism.
In the new design, a weight was employed in the form of a heavy log attached to the rotor. The top of the rotor is held and the weight spun to create rotation. This method produces less rpm than the original but allows the fan to be spun continuously in one direction only. To compensate for the lower rpm, the fan was doubled in size (from 25 cm to 50 cm) to increase blade tip speed and so air speed.
Now with a fan that spins in one direction only, a housing could be used to take advantage of this fact. A volute is an expanding spiral and housing for fans that are volute shaped help guide the air from the center to the outlet more efficiently than a tear drop shaped one. This was made using mud on the ground as opposed to a clay portable one as it was starting to get too big to transport.
The fan was tested in an iron smelt. Disappointingly, it only produced a bit of iron in the form of much smaller prills than usual due to the low rpm and hence air pressure than the original blower. After some rough calculations from research, this design might become competitive with the original blower if the fan diameter was scaled up to 1m diameter from the original 25 cm diameter fan.
The advantage of this design is that it is simpler and has fewer components than the original as there is no string that needs replacing. The dis advantage is that for it to produce good pressure it’s diameter needs to be scaled up to the point where it is no longer compact and portable.
About Primitive Technology:
Primitive technology is a hobby where you build things in the wild completely from scratch using no modern tools or materials. These are the strict rules: If you want a fire, use a fire stick – An axe, pick up a stone and shape it – A hut, build one from trees, mud, rocks etc. The challenge is seeing how far you can go without utilizing modern technology. I do not live in the wild, but enjoy building shelter, tools, and more, only utilizing natural materials. To find specific videos, visit my playlist tab for building videos focused on pyrotechnology, shelter, weapons, food & agriculture, tools & machines, and weaving & fiber.
#PrimitiveTechnology #volute #fireblower
